Q1 loudspeaker
Q1 loudspeaker
Line array loudspeaker
- Components 2 x 10"/1.3"
- Dispersion 75° x 15°
- SPLmax 139 dB
Product description
The Q1 is a passive 2-way loudspeaker housing two 10" LF drivers positioned in a dipolar arrangement and a 1.3" HF compression driver fitted to a toroidal waveshaping device. The 75° constant directivity horizontal dispersion pattern is maintained down to 400 Hz, while the vertical HF dispersion of 15° allows the Q1 to be used to construct vertical columns that produce a curved coherent wavefront. The mechanical and acoustical design of the cabinet enables vertical splay angles to be set between 0° and 14°. Q1 cabinets can therefore be used in vertical configurations starting from two cabinets with a 15° to 30° dispersion, up to 20 cabinets with a fully user and venue defined vertical profile. The Q1 cabinet is constructed from marine plywood, incorporates a pair of handles and has an impact resistant paint finish. The front of the loudspeaker is protected by a rigid metal grill covered with replaceable acoustically transparent foam, and two NL4 connectors wired in parallel are mounted on the rear panel.
with D6
with D12/D20
with D80
139 dB SPL
139 dB SPL
12.1 x 22.8 x 16.1"
49 lb
1 standard/CUT mode
2 1 m, free field, SPL max peak, test signal: pink noise with crest factor 4, one speaker driven
3 ≥ 400 Hz in dipolar direction
